About this Product
Extrusion Blowing Mold
|Blowing Unit Steel:||
|Deflashing Unit Steel:||
|Neck Insert Steel:||
1 to 8 cavities
If you're looking for bottles which are made of HDPE, LDPE, PP, PS, PETG, PVC, EVA, TPE, Nylon material etc, or you already have your own Extrusion Blow Molding Machine and want to make bottles by yourself, congrats! you've come to the right place.
First of all, we need basic information of the bottle you required.
If you don’t have an idea, we will discuss your needs, purpose and objective thoroughly and provide a concept that will satisfy your situation. We will work with you from the ground up.
The next step is to take the basic or idea and workup both 2D and 3D drawing detailing all the features. Following the drawings we then digitize the new bottle and render it out for a very close approximation of what the final bottle will look like. This is where it really starts to come to life.
If you still got worries about 2D & 3D drawings, we can provide a 3D print sample and send to you via express, so that you can have a closer look of the final design and to ensure you will order the correct bottle or mold.
After you confirm the bottle drawing or 3D sample, we start make mold design based on our extrusion blow molding machine or your machine parameters.
Next, we take the drawing to start mold manufacturing. It usually takes 30 days to get the mold done.
Now we can do the mold trial and send you real samples for final confirmation. This is where your ideal bottle becomes a reality.
The last step is deliver the mold to you. We can provide both of air & sea shipment with economical cost. Or if you want the bottles only, we can do the mass manufacturing for you.
Auto-Deflashing means the bottle neck and bottom flash are automatically cut by extrusion blow molding machine.
A auto-deflashing mold consists of two parts, the blow molding part and the deflashing part. Before you decide to buy blowing mold with auto-deflashing, please make sure your extrusion molding machine have the auto-deflshing device.
There are two types of Auto-Dflashing, it depends on bottle mouth design. Both types are actuated by pneumatic cylinder. Watch below video to learn the difference.
In this type of auto deflashing, the bottle top mouth has a wide thickness, and when bottle forming inside mold, it comes with a flash bubble on top. The cutting knife will rotate a circle to cut the whole bubble down.
In this type of auto deflashing, the bottle mouth width is smaller and the internal edge and wall are in same plane, when bottle forming inside mold, there is a open flash on top. The punch knife move forward to cut the flash down.
Please fill below form as detailed as possible, it will be great helpful for us to provide you a quick quote!